© 2023. All rights reserved.
The key to our success at GSE is the integration of our products and services to bring an all-encompassing, well-structured solution to improving plant thermal performance. The flow chart below indicates our approach to providing a results oriented solution to your thermal performance needs. It all starts with a full scope program assessment which integrates our experience and tools to identify specific performance improvements as well as foundational programmatic solutions.
GSE Engineering, Programs & Performance group (formerly True North Consulting) performs full scope program assessments. We leverage our experiences at similar plants to quickly validate existing scope and then focus in-depth on plant areas or situations unique to that particular station.
The full scope assessment executes reviews of design data such as thermal kits and plant drawings aimed at validating the scope of the program under review. It is typically structured to ensure all required systems and components are included within the program. It can also be designed to perform a negative logic review to verify required program systems or components have not been excluded. Included in the full scope review is a management overview, designed to provide a review of program implementation and maintenance aimed at providing a responsible manager, confident that his program is being correctly implemented and maintained.
The areas covered in the full scope review include:
Review the current secondary heat balance model comparing it to the plant design. This review will include not only the turbine vendor thermal kit, but also all plant drawings related to the heat balance. It is often the case that the turbine vendor thermal kit does not accurately reflect either the plant design or the current plant operation. GSE has extensive modeling experience and can greatly improve the accuracy of the heat balance model.
Perform a step wise review of each plant component and its effect on overall plant performance. All Secondary cycle heat exchanges, pumps, turbines, and drain tanks will be evaluated based on the plant data.
After a review of secondary cycle plant drawings, a walk down of all paths that could result in energy bypassing the cycle to the condenser will be performed. This will yield a list of valves that should be further evaluated for leakage. Depending on the access to the various locations, temperatures will be measured either at the valve bonnets or at a downstream location.
A report classifying all identified losses will be provided. This report will reconcile the actual generation of the plant with the target generation based on the vendor thermal kit corrected to actual plant design.
Based on the plant and component evaluations and reconciliation process, a list of recommended repairs or operational changes will be produced. This list will be prioritized by the overall cost effectiveness of each recommendation.
The current plant monitoring practices will be evaluated to determine their effectiveness in identifying plant losses. This evaluation will include which parameters are monitored and at what frequency, the calculations used to assess performance, and the communication of the monitoring results. This evaluation will include not only plant parameters, but also cycle isolation and plant walk downs.
A detailed evaluation of key instruments used in performance monitoring will be performed to determine if any cost effective changes are necessary to adequately monitor plant performance. This evaluation will include the location of the instrument, calibration practices, and the type of instrument used. One possible result of this evaluation may be using other already installed instrumentation in conjunction with the instrumentation currently being monitored.
GSE Engineering is a highly experienced team focused on creating innovative ways to meet our customers’ needs using a combination of our industry-leading services and products. The Programs & Performance group (Formerly True North Consulting) leverages decades of specialized expertise in thermal performance and engineering programs that refine and update systems, to optimize performance and safety.